Index: trunk/source/kerberos-config/edu.mit.Kerberos.macathena
===================================================================
--- trunk/source/kerberos-config/edu.mit.Kerberos.macathena (revision 129)
+++ trunk/source/kerberos-config/edu.mit.Kerberos.macathena (revision 129)
@@ -0,0 +1,96 @@
+[libdefaults]
+	default_realm = ATHENA.MIT.EDU
+	noaddresses = TRUE
+
+[realms]
+	ATHENA.MIT.EDU = {
+		kdc = kerberos.mit.edu:88
+		kdc = kerberos-1.mit.edu:88
+		kdc = kerberos-2.mit.edu:88
+		admin_server = kerberos.mit.edu
+		default_domain = mit.edu
+	}
+	CSAIL.MIT.EDU = {
+		kdc = kerberos-1.csail.mit.edu
+		kdc = kerberos-2.csail.mit.edu
+		admin_server = kerberos.csail.mit.edu
+		default_domain = csail.mit.edu
+		krb524_server = krb524.csail.mit.edu
+	}
+	NUMENOR.MIT.EDU = {
+		kdc = numenor.mit.edu
+		admin_server = numenor.mit.edu
+	}
+	MEDIA-LAB.MIT.EDU = {
+		kdc = kerberos.media.mit.edu
+		admin_server = kerberos.media.mit.edu
+	}
+	ZONE.MIT.EDU = {
+		kdc = casio.mit.edu
+		kdc = seiko.mit.edu
+		admin_server = casio.mit.edu
+	}
+	MOOF.MIT.EDU = {
+		kdc = three-headed-dogcow.mit.edu:88
+		kdc = three-headed-dogcow-1.mit.edu:88
+		admin_server = three-headed-dogcow.mit.edu
+	}
+	IHTFP.ORG = {
+		kdc = kerberos.ihtfp.org
+		admin_server = kerberos.ihtfp.org
+	}
+	GNU.ORG = {
+		kdc = kerberos.gnu.org
+		kdc = kerberos-2.gnu.org
+		kdc = kerberos-3.gnu.org
+		admin_server = kerberos.gnu.org
+	}
+	1TS.ORG = {
+		kdc = kerberos.1ts.org
+		admin_server = kerberos.1ts.org
+	}
+	GRATUITOUS.ORG = {
+		kdc = kerberos.gratuitous.org
+		admin_server = kerberos.gratuitous.org
+	}
+	DOOMCOM.ORG = {
+		kdc = kerberos.doomcom.org
+		admin_server = kerberos.doomcom.org
+	}
+	ANDREW.CMU.EDU = {
+		kdc = vice28.fs.andrew.cmu.edu
+		kdc = vice2.fs.andrew.cmu.edu
+		kdc = vice11.fs.andrew.cmu.edu
+		kdc = vice12.fs.andrew.cmu.edu
+		admin_server = vice28.fs.andrew.cmu.edu
+		default_domain = andrew.cmu.edu
+	}
+	CS.CMU.EDU = {
+		kdc = kerberos.cs.cmu.edu
+		kdc = kerberos-2.srv.cs.cmu.edu
+		admin_server = kerberos.cs.cmu.edu
+	}
+	DEMENTIA.ORG = {
+		kdc = kerberos.dementia.org
+		kdc = kerberos2.dementia.org
+		admin_server = kerberos.dementia.org
+	}
+	stanford.edu = {
+		kdc = krb5auth1.stanford.edu
+		kdc = krb5auth2.stanford.edu
+		kdc = krb5auth3.stanford.edu
+		admin_server = krb5-admin.stanford.edu
+		default_domain = stanford.edu
+	}
+
+[domain_realm]
+	.mit.edu = ATHENA.MIT.EDU
+	mit.edu = ATHENA.MIT.EDU
+	.csail.mit.edu = CSAIL.MIT.EDU
+	csail.mit.edu = CSAIL.MIT.EDU
+	numenor.mit.edu = NUMENOR.MIT.EDU
+	.media.mit.edu = MEDIA-LAB.MIT.EDU
+	media.mit.edu = MEDIA-LAB.MIT.EDU
+	.whoi.edu = ATHENA.MIT.EDU
+	whoi.edu = ATHENA.MIT.EDU
+	.stanford.edu = stanford.edu
Index: trunk/source/kerberos-config/copyright
===================================================================
--- trunk/source/kerberos-config/copyright (revision 129)
+++ trunk/source/kerberos-config/copyright (revision 129)
@@ -0,0 +1,4 @@
+This fink package was created as part of the MacAthena Project
+<http://macathena.mit.edu/> using code from the Debian-Athena Project
+<http://debathena.mit.edu>, both projects of the MIT Student Information
+Processing Board, and is released to the public domain.
Index: trunk/source/ssh-server-config/sshd_config.macathena
===================================================================
--- trunk/source/ssh-server-config/sshd_config.macathena (revision 129)
+++ trunk/source/ssh-server-config/sshd_config.macathena (revision 129)
@@ -0,0 +1,121 @@
+#	$OpenBSD: sshd_config,v 1.74 2006/07/19 13:07:10 dtucker Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options change a
+# default value.
+
+#Port 22
+Protocol 2
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+# HostKey for protocol version 1
+#HostKey /etc/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh_host_rsa_key
+#HostKey /etc/ssh_host_dsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 768
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+SyslogFacility AUTHPRIV
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin without-password
+#StrictModes yes
+#MaxAuthTries 6
+
+#RSAAuthentication yes
+#PubkeyAuthentication yes
+#AuthorizedKeysFile	.ssh/authorized_keys
+
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+#RhostsRSAAuthentication no
+# similar for protocol version 2
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here! Also,
+# remember to set the UsePAM setting to 'no'.
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# SACL options
+#SACLSupport yes
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+GSSAPIKeyExchange yes
+
+# Set this to 'yes' to enable PAM authentication, account processing, 
+# and session processing. If this is enabled, PAM authentication will 
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+# Also, PAM will deny null passwords by default.  If you need to allow
+# null passwords, add the "	nullok" option to the end of the
+# securityserver.so line in /etc/pam.d/sshd.
+#UsePAM yes
+
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+
+# no default banner path
+#Banner /some/path
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	ForceCommand cvs server
Index: trunk/source/ssh-server-config/copyright
===================================================================
--- trunk/source/ssh-server-config/copyright (revision 129)
+++ trunk/source/ssh-server-config/copyright (revision 129)
@@ -0,0 +1,4 @@
+This fink package was created as part of the MacAthena Project
+<http://macathena.mit.edu/> using code from the Debian-Athena Project
+<http://debathena.mit.edu>, both projects of the MIT Student Information
+Processing Board, and is released to the public domain.
Index: trunk/source/ssh-client-config/ssh_config.macathena
===================================================================
--- trunk/source/ssh-client-config/ssh_config.macathena (revision 129)
+++ trunk/source/ssh-client-config/ssh_config.macathena (revision 129)
@@ -0,0 +1,53 @@
+#	$OpenBSD: ssh_config,v 1.22 2006/05/29 12:56:33 dtucker Exp $
+
+# This is the ssh client system-wide configuration file.  See
+# ssh_config(5) for more information.  This file provides defaults for
+# users, and the values can be changed in per-user configuration files
+# or on the command line.
+
+# Configuration data is parsed as follows:
+#  1. command line options
+#  2. user-specific file
+#  3. system-wide file
+# Any configuration value is only changed the first time it is set.
+# Thus, host-specific definitions should be at the beginning of the
+# configuration file, and defaults at the end.
+
+# System-wide defaults set by MIT Kerberos Extras
+Host *
+  GSSAPIAuthentication yes
+  GSSAPIDelegateCredentials yes
+  GSSAPIKeyExchange yes
+
+
+# Site-wide defaults for some commonly used options.  For a comprehensive
+# list of available options, their meanings and defaults, please see the
+# ssh_config(5) man page.
+
+# Host *
+#   ForwardAgent no
+#   ForwardX11 no
+#   RhostsRSAAuthentication no
+#   RSAAuthentication yes
+#   PasswordAuthentication yes
+#   HostbasedAuthentication no
+#   GSSAPIAuthentication no
+#   GSSAPIDelegateCredentials no
+#   GSSAPIKeyExchange no
+#   GSSAPITrustDNS no
+#   BatchMode no
+#   CheckHostIP yes
+#   AddressFamily any
+#   ConnectTimeout 0
+#   StrictHostKeyChecking ask
+#   IdentityFile ~/.ssh/identity
+#   IdentityFile ~/.ssh/id_rsa
+#   IdentityFile ~/.ssh/id_dsa
+#   Port 22
+#   Protocol 2,1
+#   Cipher 3des
+#   Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
+#   EscapeChar ~
+#   Tunnel no
+#   TunnelDevice any:any
+#   PermitLocalCommand no
Index: trunk/source/ssh-client-config/copyright
===================================================================
--- trunk/source/ssh-client-config/copyright (revision 129)
+++ trunk/source/ssh-client-config/copyright (revision 129)
@@ -0,0 +1,4 @@
+This fink package was created as part of the MacAthena Project
+<http://macathena.mit.edu/> using code from the Debian-Athena Project
+<http://debathena.mit.edu>, both projects of the MIT Student Information
+Processing Board, and is released to the public domain.
Index: trunk/source/afs-config/afs.conf.macathena.in
===================================================================
--- trunk/source/afs-config/afs.conf.macathena.in (revision 113)
+++ trunk/source/afs-config/afs.conf.macathena.in (revision 129)
@@ -80,5 +80,5 @@
 # commands, define a shell function instead and put the name of the shell
 # function here.
-AFS_POST_INIT=
+AFS_POST_INIT=fs setcrypt -crypt on
 
 # Uncomment this line if you defined an afs_server_prefs function.  (If you
Index: trunk/source/hesiod-config/hesiod.conf.macathena
===================================================================
--- trunk/source/hesiod-config/hesiod.conf.macathena (revision 129)
+++ trunk/source/hesiod-config/hesiod.conf.macathena (revision 129)
@@ -0,0 +1,13 @@
+# This file determines the behavior of the Hesiod library.
+
+# This line should pretty much always be the same, unless you have a
+# funny environment.
+lhs=.ns
+
+# This determines the Hesiod domain.  You must specify an rhs line.
+rhs=.athena.mit.edu
+
+# This line specifies the class search order.  You can reverse the
+# order or leave out IN or HS if you want.  Don't add spaces after the
+# beginning of the value.
+classes=IN,HS
Index: trunk/source/hesiod-config/copyright
===================================================================
--- trunk/source/hesiod-config/copyright (revision 129)
+++ trunk/source/hesiod-config/copyright (revision 129)
@@ -0,0 +1,4 @@
+This fink package was created as part of the MacAthena Project
+<http://macathena.mit.edu/> using code from the Debian-Athena Project
+<http://debathena.mit.edu>, both projects of the MIT Student Information
+Processing Board, and is released to the public domain.